• Rubio Monocoat Home
• Rubio Monocoat Products ▼
  • Rubio Monocoat Oil Plus
  • Rubio Monocoat Industrial
  • Rubio Weekly Maintenance
  • Rubio Removing Stains
  • Rubio Monocoat Refresh
  • Rubio Annual Maintenance
  • Rubio Monocoat Restoration
• Rubio Monocoat Exterior ▼
  • Rubio Exterior Preparation
  • Rubio Exterior Treatment
  • Rubio Exterior Maintenance
  • Rubio Exterior Pictures
• Rubio Monocoat Colours ▼
  • Interior Oil Plus & Industrial
  • Exterior Chalet Colours
  • Exterior Sidings Colours
  • Exterior Decking Colours
• Rubio Machine Application
• Rubio Monocoat Resistancy
• Rubio Important Information
• Brems - Velvet Parket ▼
  • Velvet Parket Pictures
• Rubio Contact Form
• Company Profile
• Rubio Trade Shows

Maintenance

Important: After treatment with Rubio Monocoat, the floor requires 3 weeks to harden completely. During the first week, it is advisable to only clean with a vacuum cleaner or a dust mop fitted with a dry cloth. Do NOT use a damp cloth! During the second week, a adamp cloth, soaked in clean water and wrung out thoroughly, can be used with due care. After 3 weeks, the floor can be maintained using maintenance products from the Rubio Monocoat range.

Weekly Maintenance

Range: Rubio Monocoat Soap - Rubio Monocoat Soap Satin - Rubio Monocoat Surfacecare

Floors treated with Rubio Monocoat can be maintained using Rubio Monocoat Soap and water, Rubio Monocoat Soap and water, or the ready to use Rubio Monocoat Surface Care Spray.

Rubio Monocoat Soap and Surfacecare give your floor a matt finish. Rubio Monocoat Soap Satin gives your floor a soft satin finish.

Rubio Monocoat Soap and Rubio Monocoat Soap Satin

Below are guidlines to weekly care of your floor. Note: The first time Rubio Monocoat Soap Satin is applied it should not be diluted.

1.Sweep the floor and eliminate dust.

2.Pour 150 ml Rubio Monocoat Soap or 250 ml Rubio Monocoat Soap Satin into a bucket of water (10L)

3.Use 2 buckets: one for the soap and water mixture and the other for clean water only. Immerse the mop in the soapy water and wring it out until it is only half wet. Clean the first section of the first section of the floor.

4.Do not leave any surplus water on the floor. Damp mopping is sufficient. Do not walk on the floor until it is completely dry (30 minutes)

Rubio Monocoat Surfacecare

Rubio Monocoat surfacecare is a ready-to-use cleaning product for the weekly or monthly care of surfaces treated with Rubio Moncooat. Also suitable for the easey cleaning of localized stains.

1.Spray Rubio Monocoat Surfacecare on the surface to be cleaned.

2.Wipe dry with a mop or microfiber cloth

3.Allow the surface to dry for approximatley 15 minutes